Masters Theses

Date of Award

12-1991

Degree Type

Thesis

Degree Name

Master of Science

Major

Environmental Engineering

Major Professor

Bruce A. Tschantz

Committee Members

James L. Smoot, Edwin G. Burdette

Abstract

A series of twelve (12) full-scale laboratory tests was conducted to evaluate the performance and hydraulic characteristics of various orifice and weir configurations commonly used In single- and multiple-stage stormwater detention outlet control structures constructed of concrete block. The use of such concrete block structures In conjunction with detention storage appears to be growing because of apparent practical, economic, and esthetic advantages over other types of structures. However, lack of published orifice and weir discharge coefficient data for openings formed from concrete blocks leaves the hydraulic engineer with little choice but to design the detention storage and outlet control opening(s) using "guesstimate" coefficients. Inaccurate coefficients could result In either expensive over-designed or Ineffective under-designed ponds. Several combinations of weir and orifice opening geometries were tested and evaluated to account for pond bottom effect, "stacked-weir" arrangement, multiple orifices, and combined weir and orifice configurations. This thesis presents the results of a series of twelve (12) tests, which relate discharge coefficient to orifice and weir configurations and heads. It also demonstrates that required (design) detention storage will vary significantly within a relatively small range of assumed outlet weir and orifice discharge coefficients. The sensitivity analysis between required detention storage and assumed weir/orifice discharge coefficients was performed using common HEC-1 and TR-55 routing procedures. Recommendations are presented for hydraulic design, construction, and maintenance of concrete block stormwater control structures.

Files over 3MB may be slow to open. For best results, right-click and select "save as..."

Share

COinS