Validation of torsional-bending piezoelectric actuator concept

Author

Winthrop P. Smith

Date of Award

12-1993

Degree Type

Thesis

Degree Name

Master of Science

Major

Aerospace Engineering

Major Professor

Grzegorz Kawiecki

Abstract

The feasibility of generating torque and twist in thin-walled, closed cross-section structural members using piezoelectric elements is shown by investigating analytically, numerically, and experimentally firstly an aluminum flat plate model and then a composite beam model. The investigated concept is based on the application of piezoelectric elements distributed on the surface or embedded in the walls of a structural element. This study shows that this method is feasible as an alternative method of generating twist and control torque in structural members. The magnitude of twist and torque generated using piezoelectric elements is estimated.

Recommended Citation

Smith, Winthrop P., "Validation of torsional-bending piezoelectric actuator concept. " Master's Thesis, University of Tennessee, 1993.
https://trace.tennessee.edu/utk_gradthes/12028