A design study of a low-cost residence using sprayed plastic foam material
It was the purpose of this study to design a low-cost residence using a sprayed plastic foam material. Information was gathered from periodicals, from books, and from different companies producing plastic foams and machines for spray application. The purpose was to find that which had previously been attempted in this area. Architectural Research on Structural Potential of Foam Plastics for Housing in Underdeveloped Areas, which was published by the Architectural Research Laboratory at the University of Michigan, was sponsored by the Department of State's Agency for International Development. The author of this thesis relied extensively on this research for technical information.
It was found that new methods for constructing housing were urgently needed. It was also found that while the cost of traditional building materials had been going up, the price curves for many plastics had been sloping sharply downward. A sprayed polyurethane foam material had many advantages as a structural building material if properly used and if sculptural dwellings were accepted by those in need of low-cost housing. Sprayed polyurethane foam also had certain disadvantages. The design of a dwelling presented in this study attempts to minimize the disadvantages and to maximize the advantages of this material. Illustrations are included.
Thesis74.N5475.pdf
7.61 MB
Adobe PDF
ffabf2f00a7d3463aaa4377c84cd8d84