Development of design criteria for fabric filters
The purpose of this investigation was to determine design criteria relative to the design, construction, and use of synthetic fabric filters in drainage structures. Experiments were conducted on only one fabric, Mirafi 140, supplied by the Celanese Fibers Marketing Company. The basis for investigation in this research was comparison of fabric filters to conventional aggregate filters. Efficiency of fabric filters was based upon previous fabric filter tests conducted during this research.
Hypotheses were presented relative to mechanisms of filtration involving the soil-fabric system. Induced filtration and internal gradation are presented as controlling mechanisms of filtration and permeability of the system. A method of predicting soil-fabric permeability has been developed using the physico-chemical properties of the soil and theoretical values calculated from grain size data.
Evidence indicates that fabric filters have advantages over conventional aggregate filters. Fabrics have shown the ability to perform adequately under varying conditions and are certainly a useful alternative.
Thesis74.R6845.pdf
4.17 MB
Adobe PDF
d0b88a18309a58d22ccfb8c55b07a64e