The application of anthropometric and orthopedic data in the design and construction of an easy chair
The purpose of this study was to design and construct an easy chair which would be comfortable to a large percentage of users and would be aesthetically pleasing. Research was conducted on anthropometric studies, physiologic and orthopedic literature, and seating comfort studies. The recommendations of these studies were then compiled and conclusions drawn by the researcher. Application of the data to the design made possible the determination of seating dimensions that would theoretically accommodate approximately 90 percent of the adult population.
A curvalinear, open form chair was chosen to complement the low, wide profile dictated by the required dimensions. The final form was altered slightly from the clay model which was built to a scale of one inch to one foot prior to construction of the prototype.
Further research was undertaken concerning materials and construction methods. The final prototype chair was constructed of triple wall corrugated fiberboard and coated with gloss polymer medium to increase its durability. The method of construction employed was a form of lamination which added to the strength of the unit. Fiberboard was chosen for its availability on the market, its ease of construction, and its ability to be recycled.
A small scale comfort study was conducted following the construction of the chair. A group of 10 persons, randomly selected, sat in the chair for a minimum of 30 minutes. The results of the comfort study indicated that the chair was reasonably comfortable for the majority of the subjects.
Thesis74.R6247.pdf
3.01 MB
Adobe PDF
d4f7597fb772f75f904457d10a3e1223