An iterative division network for use in real time processing
The purpose of this thesis is to examine the use of a highspeed iterative division network incorporated into the design of a signal averaging circuit. The use of signal averaging for noise reduction is established, and a circuit design to implement the weighted, running average is proposed with the iterative division portion of the design being constructed and tested. Using the operation times of the constructed circuit, approximate operation times of both the total averaging circuit and extended eight and sixteen bit units were found. Division of sixteen bits by sixteen bits in approximately one micro-second was found to be entirely within the range of present technology. Since an average computer's cycle time is on the order of a micro-second, the division of sixteen bits by sixteen bits could be accomplished within one computer cycle time. The rapid division greatly reduces the time needed to average a set of signals and opens the possibility of averaging in a real-time mode.
Thesis74.H8386.pdf
1.66 MB
Adobe PDF
8431d455dd397ee29d495c79cee80f01