Time-temperature-percipitation studies of titanium-modified type 316 and type 321 stainless steels
The present research was undertaken in order to provide a relatively complete and systematic picture of the microstructural stability in both titanium-modified type 316 (316TiM) and type 321 stainless steels. These studies encompass a range of pretreatment conditions and include investigation of the recovery and recrystallization behavior of the steels as well as the phase stability.
The use of bulk extraction and x-ray diffraction techniques enabled the characterization of the precipitation activity and determination of time-temperature-precipitation diagrams between 450 and 950°c for up to 4000 hours for each pretreatment of both steels. Optical metallography allowed the study of recrystallization behavior and phase distribution. The detailed morphology and identification of the various carbides (TiC and M23C6) and intermetallic phases (sigma and chi) were determined by transmission electron microscopy.
These studies reveal that the early nucleation of TiC and Ti4S2C2 is an important factor in the phase stability of types 316TiM and 321. This influence is related to the carbon content in the matrix. The precipitation of M23C6 is delayed and its growth retarded by TiC. Sigma is preferentially precipitated in type 316TiM due to the low carbon content in the matrix. Chi formation is retarded by early sigma formation. Cold work accelerates the precipitation of M23C6, enhances sigma growth provided recrystallization refines the grain size, and suppresses chi nucleation and growth if sigma growth is accelerated. Recrystallization in type 316TiM occurs earlier and proceeds more rapidly than in types 316 and 321. The observation that type 321 is more stable than type 316TiM is explained by the differences in composition.
Thesis74.G7683.pdf
4.55 MB
Adobe PDF
bda14edc27a156194c189fb4d387d12a