On the fracture toughness of composite materials
It is suggested, and experimentally demonstrated for a boron-aluminum composite, that a lower bound for the stress intensity factor can be evaluated by using the composite strength and the effective critical crack at fracture in the expression from linear elastic fracture mechanics for a penny-shaped crack. The effective critical crack may be calculated from the expected number of adjacent broken fibers prior to failure estimated from the experimental strength distribution of the reinforcing fibers and available theory.
The strength of carbon and boron fibers was found to obey a Weibull statistical strength distribution. Composite strengths were measured by pulling to failure straight-sided specimens of carbon-epoxy and boron-aluminum composites.
In conjunction with this investigation, a fracture mechanics study was conducted on double-edge-notched carbonepoxy and center-notched boron-aluminum composite specimens. Observations concerning the secondary effects of width, volume fraction of reinforcing fibers, thickness, fiber orientation, fiber diameter and temperature on the fracture behavior are reported. The applicability of the linear elastic fracture mechanics expressions utilized was established by compliance measurements and appropriate modifications of these expressions are suggested where deemed necessary. The load at which a crack started to grow and the load at which the specimens fractured catastrophically were measured, and observations concerning the fracture mode are reported for all specimens tested.
A relationship, experimentally established, between surface crack growth and crack-opening-displacement was utilized to obtain crack resistance curves. Hence, the critical crack length necessary to initiate catastrophic fracture was determined and the critical stress intensity factors were obtained. The fracture mechanics study provides useful data concerning the behavior of the two composite systems studied and assisted in confirming the validity of the lower bound stress intensity factor calculated from the basic properties of the fibers and composites.
Thesis74b.I355.pdf
14.45 MB
Adobe PDF
ac51fb94583a8ea02514b6cc33f09022