Quantitative X-ray photoelectron spectroscopy and applications to air pollution
A simple model was proposed for use in the quantitative X-ray photoelectron spectroscopy of solids. It involved two basic parameters for obtaining relative elemental analysis: the photoelectron cross section for ionization and the mean free path of the photoejected electron. The cross sections were atomic calculations obtained from James H. Scofield and the mean free path, based on empirical data, was approximated as the square root of the kinetic energy of the photoelectron. The parameters used in the construction of the model and other considerations are discussed with regard to its validity.
Experimental data designed to test the model were obtained on a 180° double-focusing spherical-sector electrostatic spectrometer. The relative intensities for nine pure compounds examined in the gaseous state by Mg K radiation were determined in order to assess the value of the cross-sections. Approximately 15 pure solids were studied by both Mg K, and Al K photon sources in order to obtain an evaluation of the overall theory. Results obtained for several selected ratios were compared with those reported by two independent sources. The simple model was found to be fairly good and agreement between different experimental results was considered reasonable. Deviations of experiment from theory and agreement between individual results are discussed with regard to chemical effects, inhomogeneity of the sample, and experimental difficulties.
In order to illustrate the analytical usefulness of XPs in applied research, three particulate air pollution samples and the filter paper on which they were collected were studied using Al K excitation. The elements comprising the major composition of each sample were identified from the binding energy position of the peaks arising from the photoionization of core electrons. Different chemical states or environments for certain elements were also observed. The composition for one of the particulate matter samples(6.591) was examined in detail in order to obtain qualitative and quantitative identification of the elements present. The results showed XPS to be potentially applicable for routine analysis of these type samples. Sample 6.59l was also examined by Auger electron spectroscopy. The results obtained from the two independent AES sources and a bulk analysis for Pb and S found in sample 6.59l agreed fairly well with the XPs data. Considerations for this type of analysis are discussed in terms of experimental difficulties, surface versus bulk properties, and the simple model for use in quantitative XPS. Suggestions are made for future work to improve both theory and experiment if one is to obtain more accurate results.
Thesis74b.C378.pdf
6.18 MB
Adobe PDF
af884efa130cd87ad12bfa8da212e4f5