On the inlet vortex system
The inlet vortex which forms at certain flow conditions between a jet engine inlet and the ground is able to lift up pebbles and debris from the ground. Those particles which are sucked into the inlet very often damage the engine.
Because none of the known methods to prevent the formation of the inlet vortex works under all practical conditions it was considered necessary to gather more knowledge about the formation of the inlet vortex and its surrounding flow field. Therefore, flow visualization tests have been conducted in a small watertunnel with the help of the hydrogen bubble method. Besides the vortex formation process the tests showed that the inlet vortex was accompanied by a vortex system consisting of ground vortices, a trailing vortex and secondary vortices. In addition, it was shown that the inlet vortex draws its vorticity from the free stream flow which acts as a carrier of vorticity created at obstacles in the flow.
With the help of a simple potential flow model it was possible to explain physically the inlet vortex system. The importance of the stagnation point at the inlet vortex foot for the vortex formation could be shown analytically.
Thesis74b.B588.pdf
22.35 MB
Adobe PDF
a59e60759503c4c275f2faa869dbdb5f