Repository logo
Log In(current)
  1. Home
  2. Colleges & Schools
  3. Graduate School
  4. Doctoral Dissertations
  5. Analysis of conopulse radar systems
Details

Analysis of conopulse radar systems

Date Issued
December 1975
Author(s)
Sakamoto, Hajime
Advisor(s)
Peyton Z. Peebles Jr.
Additional Advisor(s)
Marshall Pace
Randall E. Cline
Permanent URI
https://trace.tennessee.edu/handle/20.500.14382/63261
Abstract

The purpose of this investigation was to analyze the conopulse tracking radar system which is a hybrid of monopulse and conical scan tracking radar systems. Two methods, the monopulse-conical scan method and the conical scan-monopulse method, were developed to extract the angle-error signals in this system.

The extraction of the angle-error signals for small pattern squint and target angle was first described. The two different approaches were applied to the analyses under this condition. Since the angle-error signals depended on the antenna patterns used, they were expanded into the Maclaurin's series. It was called the Maclaurin series method. Each pattern was expanded into the suitable series for the practical pattern representation as alternate approach. These series were used for the extraction of the angle-error signals. These two approaches were applied to the Bessel and Gaussian function antenna pattern representations and the same results were obtained.

The angle-error signals for comparatively large pattern squint and target angles were next derived by means of the Maclaurin's series method. The time dependent error signal in the monopulse-conical scan method and the sum ∑(t) and difference ∆(t) signals in the conical scan-monopulse method can be expanded into the Fourier series with respect to the antenna rotation frequency for the particular antenna representations. Their first coefficients were used for the extraction of the angle-error signals. It was called the Fourier series method. Those two approaches were also applied to the Bessel and Gaussian function pattern representations. The results were compared. Especially, in case of the Bessel function antenna pattern representation, the results were well matched over the target angle expected.

In the above discussion, the carrier component was not taken into account. The practical designs of the monopulse-conical scan method and the conical scan-monopulse method were carried out in considering the carrier component.

A noise-free assumption was made throughout the above analyses. However, the noise caused an inaccurate determination in the system. The accuracy for the signal just after the two antennas which is the theoretical limit was analyzed and the accuracies in the real systems were obtained. The closed form of the Cramer-Rao lower bounds was developed to obtain the theoretical limit and the maximum-likelihood method was applied to the analyses of the accuracies in the real systems. Then, these results of the accuracies were compared and how the accuracies in the real systems approach to the theoretical limit was discussed.

Degree
Doctor of Philosophy
Major
Electrical Engineering
File(s)
Thumbnail Image
Name

Thesis75b.S252.pdf

Size

3.89 MB

Format

Adobe PDF

Checksum (MD5)

90eb54f22112d0d7b2024184ec84df97


University Libraries

1015 Volunteer Boulevard
Knoxville, TN 37996
865-974-4351

Map & Directions
Donate to the Libraries
  • About
  • John C. Hodges Society
  • Speaking Volumes magazine
  • Outreach
  • Directory
  • Employment
  • Policies
  • Library Intranet
University of Tennessee power T logo

The University of Tennessee, Knoxville
Knoxville, Tennessee 37996
865-974-1000

Events
A-Z
Apply
Privacy
Map
Directory
Give to UT
Accessibility

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science