Fracture mechanics of weldments using finite element analysis
The fracture mechanics analysis of weldments involves the use of a fracture criterion with the stress analysis of the weldment. It has been established that weldments are non-homogeneous anisotropic materials. Hence, a new fracture criterion is necessary to predict critical directions for crack propagation as well as critical loads. The proposed criterion is that the crack will propagate in a direction so that the energy release rate is a maximum. The magnitude of the critical energy release rate is a material property.
To utilize this criterion, a two-dimensional finite element model is developed to determine the stresses in weldments. The weld metal is being treated as a non-homogeneous orthotropic material. Special crack tip triangular elements have been used to account for the singularity at the crack tip. Two techniques have been developed to model the virtual crack propagation directions:
1. The two-node technique.
2. The virtual displacement technique.
Although the two-node technique is more realistic in modeling the crack propagation, the virtual displacement technique requires less effort and computer time.
The procedure then is to generate a finite element mesh for the specimen considered and the specimen is loaded as required. The crack is allowed to propagate by increasing its area by δA in a given direction. The energy release rate G is obtained from the expression:
G = -δΠ/ΔA
where ΔΠ is the change in the potential energy of the specimen as the crack area is increased by ΔA in a given direction.
A compact tension specimen with a hypothetical weld is analyzed using the above technique. An actual weldment has also been analyzed with quarter symmetry assumed, and with no symmetry conditions assumed.
The results indicate the importance of taking into consideration the anisotropy of the weld metal. The maximum energy release rate theory explains crack branching and trregular crack behavior in weldments. These results find immediate application in subcritical crack growth problems.
Thesis75b.Y685.pdf
5.37 MB
Adobe PDF
8b50b2146711fc99f079064cb756c6ca