Repository logo
Log In(current)
  1. Home
  2. Colleges & Schools
  3. Graduate School
  4. Doctoral Dissertations
  5. Dynamic analysis of a pendulous suspension system
Details

Dynamic analysis of a pendulous suspension system

Date Issued
June 1975
Author(s)
Kanianthra, Joseph N.
Advisor(s)
Frank H. Speckhart
Additional Advisor(s)
R.L Maxwell
A.J. Edmonson
T. G. Carley
B. R. Dewey
Permanent URI
https://trace.tennessee.edu/handle/20.500.14382/63202
Abstract

Rail transportation can be made considerably more attractive if higher safe speeds can be achieved without sacrificing ride comfort. This study was undertaken to investigate the potential of a pendulous suspension system in providing lateral vibration isolation in highspeed passenger rail cars. Pendulous suspensions are capable of permitting higher safe speeds for the following reasons:

1. The undesirable coupling effect between the motion of the car body or coach and the wheel truck can be minimized by proper kinematic design of the links.

2. Proper design of the links which support the vehicle body can improve ride comfort by reducing the lateral, vertical, and rolling motions of the car.

3. Proper design of the vehicle components can provide for "banking" of the vehicle body in negotiating curves.

4. Uncoupling of the car body motion from the motion of the wheel truck will reduce the dynamic forces in the system. This, in turn, may allow safe operation at increased speeds.

The above factors suggest that such a design can be tuned to improve ride comfort and at the same time to achieve speeds higher than those allowed at present on existing tracks.

The purpose of this study was to establish the effect of various suspension parameters and select a set of optimum parameters for a pendulous suspension. The analytical model used had four degrees of freedom. These were rigid-body vertical and rotational motions of the supporting frame, the swing angle of the inclined left support link, and the lateral motion of the top floating mass from which the car body is suspended. Functional relationships were developed using the method of least-squares to describe the vertical, lateral, and rolling motions of the coach or car body in terms of the swing angle θ1 of the left support link. The nonlinear equations of motion were linearized using small displacement approximations. Complex receptance matrix method was then used in solving the linearized equations. Steady state response of the center of mass of the car body was determined from the solutions of these equations of motion. Sinusoidal forcing inputs in the lateral and vertical directions were used at the wheel.

Amplitude ratios of steady state displacements in the lateral, vertical, and rolling modes to the wheel input amplitude were calculated from the steady state displacements of the car body. Velocities and accelerations were also determined for various input frequencies. These results were used to develop frequency response curves. Based on a published formula involving accelerations and frequencies, ride comfort indices were computed. They were used to compare relative performances of various configurations of the system.

The system's capability to negotiate curves without excessive lateral motion of the car was determinod by comparing steady-state swing angle ratios for various configurations. "Banking" of the car body or coach enables the vehicle to keep the resultant of the gravitational and centrifugal forces while rounding curves nearly perpendicular to the car floor. Superelevation provided in the rail-bed is also helpful in achieving the "banking" effect. The angle between the vertical and the vector representing the combined centrifugal and gravitational forces while negotiating curves is termed as swing angle. In a rail car where no provision is made for the rotation of the car body by the action of the inclined links, the resultant of the gravitational and lateral accelerations will not necessarily be perpendicular to the car floor. This would cause the passengers to be subjected to an inertial force which acts at an angle to the passenger seat. A certain amount of this nonperpendicular inertial force can be tolerated. This uncompensated inertial force is sometimes expressed as "insufficiency of superelevation." The swing angle for this uncompensated acceleration is termed as ideal swing angle and is allowed to be approximately five degrees under steady state conditions for a O.1 g acceleration in curving. For the pendulous suspension system the actual swing angles were calculated and they were expressed as ratios of ideal swing angles. On the basis of these swing angle ratios, the capability of various configurations of the system to traverse curves was determined.

The time-response of the system to suddenly applied vertical displacements of the wheel was also examined. Treating the rail as a beam on an elastic foundation, rail deflections were calculated for a rail on a foundation having arbitrary variations in its stiffness. The rail deflections were then simulated as time-varying vertical inputs to the wheel. The response of the pendulous system was then numerically obtained and compared to the response of a conventional system under the action of the same wheel inputs.

The results from the frequency response curves, the comfort criteria, and the curving performance for different combinations of the suspension parameters were used to select an optimum set of vehicle suspension parameters. It was concluded from the results that the proposed pendulous suspension system is capable of achieving lateral attenuation of vibration when lateral and vertical sinusoidal wheel inputs are applied.

Degree
Doctor of Philosophy
Major
Mechanical Engineering
File(s)
Thumbnail Image
Name

Thesis75b.K255.pdf

Size

5.15 MB

Format

Adobe PDF

Checksum (MD5)

6a5c58311ba91068a322d7a53e5a4d11


University Libraries

1015 Volunteer Boulevard
Knoxville, TN 37996
865-974-4351

Map & Directions
Donate to the Libraries
  • About
  • John C. Hodges Society
  • Speaking Volumes magazine
  • Outreach
  • Directory
  • Employment
  • Policies
  • Library Intranet
University of Tennessee power T logo

The University of Tennessee, Knoxville
Knoxville, Tennessee 37996
865-974-1000

Events
A-Z
Apply
Privacy
Map
Directory
Give to UT
Accessibility

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science