An investigation of several parameters affecting the initial performance curve of fabric filters
The primary objective of this study was to develop a model based on theoretical and experimental considerations which provided a prediction of the resistance to flow through fabrics filtering particleladen gas streams. This model was to be used to predict the resistance to flow through new (unconditioned) fabric filters. The model required that certain fabric, particle, and carrier gas characteristics be defined such that knowledge of the parameters allowed a prediction of the performance or operating curve (resistance to flow as a function of the quantity of filtered dust).
It was found that the performance curve was separated into two zones: the cake repair zone and the homogeneous cake filtration zone. In the cake repair zone, an equation of the form
ΔP/V = eΒ (CiVt)M
was found to describe all but two of the 106 data sets obtained on two pilot plant test facilities with a correlation coefficient of greater than 0.90. The variables in the equation were defined as
ΔP = pressure drop across fabric (inches H20)
V = filtration velocity (feet per minute)
Ci = dust loading (pounds/CF)
t = filtration time (minutes)
M, B = parameters dependent on the specific fabric/dust combination
CiVt = areal cake density (pounds per square foot of cloth area)
e = exponential.
The cake repair zone was found to extend to a value of area cake density of 0.05 pounds per square foot of cloth area.
The homogeneous cake filtration zone was described by the equation
ΔP/V = eΒ (.05)M + K2op (ciVt - 0.05)
where K2op was the dust resistivity defined as the slope of the curve of ΔP/V versus CiVt. This equation was found to describe the zone of areal cake density between 0.05 and 0.10 pounds per square foot of cloth area for all but two of the data sets with a correlation coefficient of 0.90.
For nine of the fabrics studied, it was found that M and B were functions of K2op such that the above equation could be defined as a function of the fabric type, dust resistivity (K2op), and the areal cake op density.
Other objectives of the study were to determine the effect of (1) velocity on the initial performance curve of a fabric filter and (2) conditioning of a periodically-cleaned fabric filter on the basic performance curve. This latter objective involved an examination of a conditioned fabric filter to determine the effect of various shaking motions, amplitudes, and frequencies on the residual resistance of the fabric.
Thesis75b.D293.pdf
5.97 MB
Adobe PDF
299f5679dcb0d12dd6ddd106e081fc5e