Atmospheric flow over two-dimensional bluff surface obstructions
The phenomenon of atmospheric flow over a twodimensional surface obstruction such as a building (modeled as a rectangular block, a fence or a forward facing step) is analyzed by three methods: (1) an inviscid free streamline approach, (2) a turbulent boundary layer approach using an eddy viscosity turbulence model and a horizontal pressure gradient determined by the inviscid model and (3) an approach using the full Navier-Stokes equations with three turbulence models, i.e., an eddy viscosity model, a turbulence kinetic energy model and a two-equation model with an additional transport equation for the turbulence length scale.
A comparison of the performance of the different turbulence models is given, indicating that only the twoequation model adequately accounts for the convective character of turbulence. Turbulence flow property predictions obtained from the turbulence kinetic energy model with prescribed length scale are only insignificantly better than those obtained from the eddy viscosity model.
A parametric study includes the effects of the variation of the characteristic parameters of the assumed logarithmic approach velocity profile. For the case of the forward facing step it is shown that in the downstream flow region an increase of the surface roughness z0 gives rise to higher turbulence levels in the shear layer originating from the step corner. This in turn results in higher shear stress leading to faster reattachment of the separated flow. The typical eddy size in the shear layer increases with z0 and causes rapid spreading of a region of high streamwise vorticity gradients. In the upstream flow region changes in z0 have only moderate influence on the flow parameters. Except for very small surface roughnesses the separation bubble in front of the step is found to grow in size.
Thesis75b.B395.pdf
8.12 MB
Adobe PDF
5a98b4b70b4109131456ec0cc465a193