A study of the distribution of trace elements (iron and manganese) and cathodoluminescent zonation in mineralized fracture fillings
The purpose of this investigation was to determine if there is a relationship between the cathodoluminescent patterns (zonation) observed in dolomite fracture fillings in breccias of the Mascot-Jefferson City zinc district of East Tennessee and their trace element (iron and maganese) composition.
Analytical techniques used in this study include X-ray diffraction, atomic absorption spectrophotometry, staining procedures, scanning electron microscopy and electron microprobe analyses. X-ray diffraction was used to verify the mineralogy of dolomite breccia fragments and dolomite vein (or fracture fillings). Diffraction patterns are indicative of dolomite with minor amounts of calcite and quartz in some samples. Atomic absorption was employed to determine trace element content in both vein and breccia dolomites. Iron (0.1 to 0.9 wt %) and manganese (0.01 to 0.13 wt %) were major trace elements in the dolomites. A scanning electron microscope with a multichannel X-ray analyzer was used to traverse areas showing cathodoluminescent zonation; however, the quantities of iron and manganese present in these samples proved to be below limits of detection by this method. Staining with potassium ferricyanide was used to determine the distribution of ferrous iron in crystalline dolomite. Staining indicated that iron is concentrated in dark luminescent zones. Electron microprobe analyses were performed by traversing cathodoluminescent zones at intervals of approximately 10 mils (0.254 mm). EMP data in seven specimens revealed higher quantities of iron and higher Fe/Mn ratios in the darker luminescent zones with indications that manganese is present in greater amoungs in bright luminescent zones.
Thesis74.C622.pdf
2.31 MB
Adobe PDF
e5d6f0563a542fdc15dd9f0957514875