A study of the effects of increased temperature, pure oxygen use, and pressure on the activated sludge process
The purpose of this investigation was to determine the effects of increased temperatures in the range of 22°C and 46°C, use of pure oxygen in place of air, and increased pressure up to 1.5 atmospheres on the activated sludge process. Experimental data for the investigation was obtained on seven parallel biological reactors operated with synthetic feed over a period of seven months. Kinetic constants were derived for substrate removal, sludge yield and oxygen uptake under controlled environmental conditions.
Substrate removal data was found to fit the Michaelis-Menten model U = um Se/(ks + Se). Maximum utilization rate, um, and saturation constant, Ks, were both effected by temperature in remarkably similar manner. The net effect of temperature on the substrate removal rate, U, was slight and this observation agrees well with results as reported in previous studies.
Sludge yield was significantly affected by temperature, especially at high organic loadings. . Minimum yield was obtained at 30°C under the experimental conditions of this research. Substantial savings in sludge handling and disposal costs were indicated by operating an activated sludge plant at a controlled optimum temperature.
Endogenous respiration rate of activated sludge was found to be greatly affected by temperature, but the synthesis demand rate was relatively less affected. The effect of temperature on oxygen uptake rate was therefore more pronounced at low organic loadings where endogenous respiration accounts for a major portion of the oxygen demand.
A high dissolved oxygen concentration (+ 15 mg/1) was easily maintained with pure oxygen use at all mixed liquor concentrations. Pure oxygen units generally developed a sludge with better settling characteristics. No significant advantages were found in operations under increased pressures. When the effluent was depressurized by exposure to the atmosphere, the suspended solids in the effluent were partially floated to the surface with the fine air bubbles released.
It was concluded that a temperature range of 30°C to 34°C was optimum for activated sludge under the experimental conditions of this research. In the kinetic models developed, the temperature range from 34°C to 42°C, which may be the transition zone from mesophyllic to thermophillic bacterial populations, was not easily susceptible to predictive modeling. The information obtained in this study will potentially lead to the useful application of waste heat from industrial processes to waste treatment systems.
Thesis75b.A883.pdf
13.26 MB
Adobe PDF
24603d9e08e480e6078b81d9f4ea4d5f