The effect of a non-uniform mixing duct velocity profile on the aftbody drag of a nacelle equipped with a jet pump propulsive simulator
In recent years, the problem of engine airframe integration has gained in importance. As the performance of aircraft becomes critical, an accurate technique of wind tunnel simulation of a propulsive jet plume is desired.
A method is described of analytically simulating y a jet plume. This procedure involves a series of five computer programs:
1. 1-D Ejector Mixing Program.
2. Turbulent Ducted Mixing Program.
3. Transonic Nozzle Program.
4. Lockheed Method of Characteristics Program.
5. Douglas Neumann Potential Flow Field Program.
Drag coefficients obtained by this method of simulation displayed a trend similar to experimental results. However, this particular approach proved to be too simplified (that is, flow entrainment was neglected) for accurate numerical results to be obtained.
Thesis75.P435.pdf
3.38 MB
Adobe PDF
5eb7f59f45df55752cde5b83d6e0252d