A real-time monitor and display system for the propulsion wind tunnel compressors
Analog data acquisition, that required visual monitoring and evaluation of data, was previously employed in the 16T-16S monitor room at Arnold Engineering Development Center. In order to alleviate existing problems associated with the monitoring instrumentation complex, a real-time monitor and display system was developed.
The information can now be processed automatically by computer, enabling reliable and rapid analysis of the data. Extensive instrumentation, in the compressor areas which are considered potentially critical, is continually monitored and analyzed to ensure mechanically safe compressor performance. Computer subroutines (modules) that have been written to determine rotor blade stresses, stator blade stresses, temperature, vibration, pressures, and RPM are described.
The real-time monitor and display system, which is described in this thesis, provides readily available means for supplying accurate, on-line displays in engineering units for the wide variety of variables involved in the monitoring complex.
Thesis75.J693.pdf
8.11 MB
Adobe PDF
9ca66f9c0cb0395baa16f22c8cd8b71b