Repository logo
Log In(current)
  1. Home
  2. Colleges & Schools
  3. Graduate School
  4. Doctoral Dissertations
  5. Kinetic mechanisms of diffusion in sorbent solids
Details

Kinetic mechanisms of diffusion in sorbent solids

Date Issued
December 1976
Author(s)
Pollock, Mark Alan
Advisor(s)
Stanley H. Jury
Additional Advisor(s)
R. F. Johnson
P. W. Schaefer
Permanent URI
https://trace.tennessee.edu/handle/20.500.14382/61384
Abstract

The theory of diffusion of adsorbing gases in porous sorbent solids is extended by various combinations of free (gaseous) diffusion, Knudsen diffusion, surface diffusion, interstitial diffusion, and grain boundary diffusion. Both ordinary and thermal diffusion are investigated using the thermodynamics of irreversible processes to derive the general flux equations.

A new diffusion cell is described, and it is used to test the diffusion models. The cell is operated to a steady state under either isothermal or nonisothermal conditions. The cell may also be used for several types of transient experiments. Very general, yet practical, air-water-desiccant systems arc studied using activated alumina, Florite, silica gel, Drierite, and Linde molecular sieve-4A. The first three desiccants are porous, surface adsorbing solids, and the last two are porous and zeolitic adsorbing solids.

Activated alumina and Florite data were fit very successfully by a pore model combining in parallel the gas-phase and surface diffusion. Surface diffusion dominates the transport process. The activation energy for surface diffusion is constant and is approximately equal to the mean isosteric heat of adsorption. The model is theoretically consistent over the entire concentration range (0≤CA≤CAsat). Silica gel results are inconclusive using the data presently available.

Drierite is viewed as a "close-packed," heterogeneous material permitting use of a simple model using Knudsen diffusion in the intercrystalline voids in parallel with interstitial diffusion within the zeolitic crystallites. The activation energy for interstitial diffusion was approximately 94% of the heat of adsorption.

Two diffusion models are suggested for Linde molecular sieve-4A. For one a "close-packed," heterogeneous structure similar to Drierite is envisioned, assuming that heat treatment in manufacture converts the 20% Kaolin based clay to zeolite. A fit of experimental data using the simple parallel combination of Knudsen and interstitial diffusivities leaves something to be desired. With this simple model, the activation energy for interstitial diffusion was approximately 94% of the heat of adsorption.

For the second model, a "dispersed," heterogeneous structure is envisioned on the assumption that the 20% clay acts as a dispersant that is not converted to a zeolite which is identical with the dispersed zeolite. Here a general, series-parallel combination of individual diffusivities seems appropriate, but time did not allow testing this model.

Nonisothermal, J = 0 runs suggest that the thermal diffusion ratio is related to the sorption therm by = -(∂cA/∂T)PA for all the desiccants except silica gel which was not run. This result is revolutionary and may have potential application in thermal diffusion processes in metals as well.

In addition, this research has produced a new approach to numerical integration which views the definite integral in terms of steady-state "flux," instead of the conventional "area" interpretation. A method has also been developed for calculating the maximum temperature which can occur in a fixed bed sorption column. Isosteric heats of adsorption were also investigated, and a logarithmic dependence of the differential heat of adsorption on loading was found.

-vii-

Degree
Doctor of Philosophy
Major
Chemical Engineering
File(s)
Thumbnail Image
Name

Thesis76b.P655.pdf

Size

13.97 MB

Format

Adobe PDF

Checksum (MD5)

afc3651513e1720960e47e57c5a92bb6


University Libraries

1015 Volunteer Boulevard
Knoxville, TN 37996
865-974-4351

Map & Directions
Donate to the Libraries
  • About
  • John C. Hodges Society
  • Speaking Volumes magazine
  • Outreach
  • Directory
  • Employment
  • Policies
  • Library Intranet
University of Tennessee power T logo

The University of Tennessee, Knoxville
Knoxville, Tennessee 37996
865-974-1000

Events
A-Z
Apply
Privacy
Map
Directory
Give to UT
Accessibility

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science