Flow of polymer fluids into cone and converging plates
The flow of polymer fluids into a cone and between converging plates was studied both theoretically and experimentally.
In the theoretical part, flow patterns of viscoelastic fluids into a cone and converging plates were calculated by a perturbation procedure, adopting the second and third order fluid models. In both cases, a secondary circulating flow was predicted and the ratio of coefficients of the third order fluici was found to dominate the flow patterns, i.e., ω3/ω1 in a cone and primarily ω6/ω1 in converging plates. Furthermore, an attempt to correlate flow patterns to elongational flow was made.
In the experimental parts, the laminar flow patterns were studied in a capillary die for nine low density polyethylenes, one high density polyethylene and nine polystyrenes, all of which were well characterized rheologically. The end pressure drops were measured. The dependence of the flow patterns on geometry angle was studied in a wedge type die. Flow patterns into complex dies were also observed. Furthermore, the onset of flow instabilities was observed.
Many attempts were made to correlate the theoretical predictions and the experimental results. The most useful correlating group involves the ratio of the first normal stress difference to the shear stress. Similar dimensionless groups involving various constant characteristic relaxation times, such as a maximum relaxation time, do not work particularly well. By expressing the Weissenberg number as
N’we =(Vch/Lch) λch N1/2σ12
(evaluated at the capillary die wall), it is possible to represent reasonably well the flow patterns of the three polymer families. Various methods of improving the correlation are described.
Thesis76b.K653.pdf
5.79 MB
Adobe PDF
acd935c0ec14decd1b052c0e1a2a55b4