The rheology of fiber formation
Elongational flow behaviors or polymer melts were investigated for various kinds of polymers including low and high density polyethylenes (IDPE and HDPE), polystyrenes (PS), polypropylenes (PP), und polymethyl methacrylate (PMMA). Simple equipment to provide a constant stretch rate condition was developed and used for the study. The elongational viscosity functions for the various polymer melts were obtained. The stress responses were described reasonably well by the Bogue and White model or a generalized convected Maxwell model.
A mathematical theory integrating all instability mechanisms: capillarity, ductility, and fracture has been developed and successfully applied to the filament spinnability problem. The extensibility is predicted to show a maximum due to the three competing mechanisms. Different failure characteristics observed for LDPE and PS versus HDPE and PP were interpreted as due to different dependences of relaxation time upon deformation rate.
The instability concepts developed for tensile tests were applied to the continuous melt spinning process. It is suggested that draw resonance is an analogue of ductile instability and accumulation of material in the spinpath is responsible for such severe fluctuations. The threadline instabilities were discussed for isothermal and non-isothermal conditions.
Thesis76b.I332.pdf
11.22 MB
Adobe PDF
b08e248e4901106e0c3f8cd86b768b55