An analysis by the Green's function method for flow over axisymmetric bodies including the transverse curvature effect
A theoretical investigation of the boundary layer equations for two-dimensional and axisymmetric flow is presented.
By using the Boussinesq's eddy-viscosity and mean velocity distribution concepts, the Reynolds shear stress term is modeled to be similar to the viscous shear stress in the laminar flow. The Mangler-Levy-Lees transformation provided an almost two-dimensional model for axisymmetric flow and also absorbed the compressibility into the coordinate transformation. Then the governing equations are written in general compact form which are applicable for calculating the incompressible and compressible flow behaviors of both laminar and turbulent flows for both the two-dimensional and the axisymmetric cases. In the latter flow, consideration of the transverse curvature effect is also included.
The partial differential equations are first recast as the ordinary differential equations by replacing the streamwise derivatives by a simple backward difference formulation. Then, by appeal to Green's theorem, the ordinary differential equations are rewritten as a nonlinear integral equation at each successive streamwise station. The sequence of integral equations is then solved by iteration.
The importance of the transverse curvature effect is demonstrated by comparing the results from the flat plate case (which corresponds to the circular cylinder result without consideration of the transverse curvature effect) with the results of the circular cylinder for various slenderness ratios in the laminar incompressible flow case. The results obtained by considering the transverse curvature effect are in good agreement with the results of Seban-Bond, Kelly, and Lighthill. With such reliable results obtained for the laminar incompressible flow case, comparisons are also presented for the laminar compressible turbulent incompressible and turbulent compressible flow cases. Calculations of the flow behavior by imposing positive and negative pressure gradient are presented to demonstrate the calculation procedure for arbitrary shaped bodies of revolution.
Thesis76b.C366.pdf
3.76 MB
Adobe PDF
46af2b680014304af4da1bb4b2291e68