Development of an automobile brake performance test for the detection of worn friction material
Consumer concern regarding the high cost of automobile maintenance coupled with concerns over automobile safety, economy, and air pollution, led to government sponsorship of large diagnostic automobile inspection demonstration projects such as Project Auto/SEE, managed by the University of Tennessee. Much of the time, effort, and expense in a diagnostic vehicle inspection is associated with brake testing and brake inspection. In addition to performance tests, brakes are subjected to visual inspections primarily to check the thickness of the brake lining friction material. The visual inspection requires a mechanic and generally lengthens the time required to inspect a vehicle. This study was undertaken to determine whether abnormally thin linings could be detected through performance testing, thus eliminating the need to visually inspect the brakes of every vehicle passing through the inspection facility.
A finite-difference numerical solution to the brake heating problem was developed to study the heating phenomena during braking or during performance testing on a roller brake dynamometer. The accuracy of the solution was verified via comparison with experimental data. Investigation of the friction coefficient (highly dependent on lining temperature) behavior during simulated inertia stops on a roller brake dynamometer, revealed a brake performance parameter which was found to be a function of lining thickness. In-the-field experiments proved that properly monitoring this parameter could provide 95% accuracy in detecting linings with less than 1/32" of usable friction material remaining. A controlled experiment also verified the validity of the parameter, Inclusion of these findings in a vehicle inspection program would likely result in substantial savings of effort and cost.
Thesis76b.G728.pdf
5.53 MB
Adobe PDF
d019cc29507b60b223a1d83688a30d81