Stress analysis of support design for horizontal pressure vessels subjected to pressure and seismic loads
The purpose of this study is to present the results of a study in which the author has used the finite element method to compare displacements, interface pressure and stresses in the saddle-shell interface region for a particular pressure vessel for cases where the shell is both welded and unwelded to the saddle supports, and subjected to the vertical loads. In addition, support designs for several horizontal pressure vessels were analyzed when they were subjected to seismic loads. The results of this investigation are compared with the results of several previous theoretical and empirical pressure vessel studies.
The finite element results show that when the pressure vessels were subjected to vertical loads only, the maximum stresses obtained are markedly less than same recently published results but agree favorably with some standard codified design procedures. When these vessels were subjected to seismic loads, the maximum stresses in the saddle structure were extremely high. This could cause failure of the support due to local buckling. These results also indicate that the development and analysis of saddle designs capable of resisting seismic loading should be the next stage of research effort in this area.
Thesis76.S347.pdf
2.21 MB
Adobe PDF
6d48b81b19fee9f254b83858550518ca