Strain gage accelerometer suitability for aircraft and missile strapdown inertial guidance systems
The purpose of this investigation is a conceptial study of an accelerometer consisting of an array of cantilevered beams instrumented with strain gages for use in a precision inertial guidance system. The investigation considered the configuration of the array, the treatment of the straingage data, the errors, the redundancy management inherent in the least spares data reduction technique, and a comparison of this instrument's parameters with those of an actual accelerometer from the Apollo program. No optimunization or design features were attempted in this study.
The physical characteristics and configuration of an orthogonal array of 6 beams were modeled for a Fortran computer program to take acceleration inputs and generate straingage outputs. Beam parameters, orientations, and materials are variables in this model. The output of this model was used by a second program utilizing least squares techniques to separate out the linear and angular accelerations representing the output of the accelerometer. Error sources were analyzed and were either used in the total error predictions for comparison with the actual accelerometer or were rationalized as being negligible. The comparison with the actual accelerometer was done by developing criterion that the theoretical accelerometer had to meet based on the parameters of the actual one. This accelerometer could be used in many of the NASA programs requiring accuracys equivalent to those of the accelerometer used for comparison. A byproduct of this accelerometers output are angular rate data that could be used to replace the gyros in an inertial guidance system.
The computer runs of the computer model with large errors demonstrated the error smoothing capabilities of the data reduction model. Some of the errors used in these tests were large enough to be considered straingage failures, these results demonstrate the redundancy management capability. The rationalization of the Apollo Accelerometer's specificationstions showed that if the assumptions made are correct the straingage accelerometer's performance is at least high enough to be a good low cost midrange, mid precision accelerometer. The critical assumption concerns the electronic capabilities.
Thesis76.R395.pdf
2.69 MB
Adobe PDF
1cc3d3fd858d71809e12b79565afa608