Repository logo
Log In(current)
  1. Home
  2. Colleges & Schools
  3. Graduate School
  4. Masters Theses
  5. Edge-defined, film-fed growth : a process evaluation
Details

Edge-defined, film-fed growth : a process evaluation

Date Issued
August 1976
Author(s)
Respess, John H.
Advisor(s)
Ben F. Oliver
Additional Advisor(s)
E. E. Stansbury
C. R. Brooks
Permanent URI
https://trace.tennessee.edu/handle/20.500.14382/60974
Abstract

The Edge-defined, Film-fed Growth (EFG) process is a relatively new solidification process which shows considerable promise in producing shaped materials directly from the melt. In order to utilize it to the maximum, it is necessary to explore the limits of the process controlling parameters. The following areas were explored in an effort to locate and characterize some of the important process parameters.

1. Materials exhibiting various types of solidification modes were grown via EFG to study the effect of faceting and nonfaceting behavior. V2O5, a faceting material, and LiF, a relatively nonfaceting material, were grown by the EFG process for this end.

2. The extent of shape producing capabilities of the process was explored by attempting to grow crystals in the form of thin ribbons, round tubes, square channels and airfoils. Dies of these configurations were constructed for this purpose.

3. A LiF/CaF2 eutectic composition crystal was grown to study the growth interface characteristics and to explore the use of EFG in the production of aligned coupled eutectic materials.

4. Factors associated with EFG in general such as fluid flow, heat flow, wetting and spreading of the meniscus film on the die, die temperature, growth velocities, etc., are discussed and pertinent observations made in these areas during t the growth experiments are given.

It was found that faceted growth upon solidification can limit the spreading and edge definition of the growing crystal. Some orientations of facets show enhanced stability with respect to increasing growth velocities than do others.

The ability of the process to generate desired cross-sectional shapes appears excellent. Samples with flat surfaces, curved surfaces, inside and outside square corners, and hollow shapes were all successfully produced.

Aligned, coupled eutectic structures were obtained up to growth velocities of 10.00 cm/hr. Observations were made of lamellar to cellular transformations at the outer surface of the LiF/CaF2 eutectic crystal grown. These areas of transformation occur at curved growth interfaces. Lamellar structure was unexpectedly found at the outer surface. Tentative mechanisms involving interfacial energies and fluid flow are proposed to explain the structure.

Control of the heat flow at the solid-liquid interface appears to be the most important process stability parameter in general.

 
Degree
Master of Science
Major
Metallurgical Engineering
File(s)
Thumbnail Image
Name

Thesis76.R386.pdf

Size

16.38 MB

Format

Adobe PDF

Checksum (MD5)

a0c18893b94108d4f45b8b7f3e8389f8


University Libraries

1015 Volunteer Boulevard
Knoxville, TN 37996
865-974-4351

Map & Directions
Donate to the Libraries
  • About
  • John C. Hodges Society
  • Speaking Volumes magazine
  • Outreach
  • Directory
  • Employment
  • Policies
  • Library Intranet
University of Tennessee power T logo

The University of Tennessee, Knoxville
Knoxville, Tennessee 37996
865-974-1000

Events
A-Z
Apply
Privacy
Map
Directory
Give to UT
Accessibility

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science