Dynamic analysis of an instrument pointing system
A unique instrument pointing system concept is presented for Spacelab missions. This concept has soft shockmounts between the pointing system and the Space Shuttle pallet which permit a large center of mass offset between the instrument and the gimbal set. The gimbal set may, therefore, be located at the convenience of the designer and does not constrain the size or shape of the payload. However, the pointing system is restricted to on-orbit or zero "g" operation and requires independent hold down of the payload during ascent and reentry.
The instrument pointing system is analyzed in a zero "g" environment via computer simulation with Shuttle disturbance inputs. The equations of motion are derived and both analog and digital computer results are presented to illustrate the dynamic motion of the system.
The sensitivity of the pointing system performance is demonstrated for variations in important design parameters such as control frequency, center of mass offset, mass characteristics, bearing friction, and pointing position. The analysis shows excellent pointing stability can be achieved with the proposed system. This instrument pointing system has the potential of being the most versatile general purpose pointing system yet conceived and should serve an essential role for Spacelab missions.
Thesis76.H694.pdf
1.65 MB
Adobe PDF
22398539299db743a866a2ced8611569