Study of direct skin friction measurements and design of nozzle for upper transonic wind tunnel
During these investigations studies have been conducted with the modified Naval Ordinance Laboratory skin friction balance for skin friction measurements in the University of Tennessee Space Institute's wind tunnel. However, a successful measurement was not obtained. Because the transonic wind tunnels are generally noisy and with vibration during the run, no correct measurement was obtained. Even though the Naval Ordinance Laboratory balance was designed to be insensitive to vibration, it was found that it is, in fact, vibration sensitive.
A new skin friction gage was invented and manufactured at the University of Tennessee Space Institute. This gage is based on a completely new idea of directly measuring the forces on a portion of a tape passing over two flexures. Bench experiments show satisfactory operation of a simplified version of this gage. This gage has shown a very satisfactory performance for both bench testings and also for a preliminary study in the wind tunnel.
An upper transonic perforated nozzle was designed and fabricated for the University of Tennessee Space Institute's transonic wind tunnel. The nozzle has been installed and tested. Studies show a good performance of the nozzle as designed. This makes the University of Tennessee Space Institute's tunnel capable of operating at upper transonic flow Mach numbers.
Thesis76.V255.pdf
5.97 MB
Adobe PDF
bf7fd783816e54fb23618d15894eea24