Repository logo
Log In(current)
  1. Home
  2. Colleges & Schools
  3. Graduate School
  4. Masters Theses
  5. Nonisothermal rheological behavior of polymer melts
Details

Nonisothermal rheological behavior of polymer melts

Date Issued
March 1976
Author(s)
Matsui, Michikage
Advisor(s)
Donald C. Bogue
Additional Advisor(s)
J. E. Spruiell
James L. White
Permanent URI
https://trace.tennessee.edu/handle/20.500.14382/60869
Abstract

Most polymer processing operations involve melt flow under conditions of rapidly changing temperature. One the other hand, almost all basic work in rheology, both experimental and theoretical, has dealt with isothermal flow, with the temperature being held constant during any one measurement. The present work has dealt with noniso-thermal response, both as a basic problem in rheology and as it is related to a polymer processing operation.

Generalized viscoelastic theory was formulated by combining the Boltzmann superposition concept with the time-temperature superposition principle and introducing a nonlinearity into the memory function. The generalized theory uses the concept of a weighted time scale to account for the speeding up or slowing down of the relaxation processes.

In the experimental part of the work an elongational deformation was imposed on a molten sample in a tensile testing apparatus, with the sample being surrounded by two reflecting heater walls which focussed radiant heat from nichrome wires onto a fiber-like sample. By applying a programmed voltage to the nichrome wires, a quick temperature change was imposed on the sample.

Certain preliminary runs were made under isothermal conditions. Then two kinds of noniso-thermal experiments, involving changes of temperature during tensile pulling and after it, were carried out. In the latter (simple stress relaxation) experiments, the results were well explained by the weighted time history used in the theory. However, in the former experiments (involving temperature changes during the pulling) the time scale of the accomodation to the temperature jump was smaller than expected from theory.

Finally, the generalized theory was applied to an actual processing operation (melt spinning). The theory was in good agreement with melt spinning data of J. R. Dees for high density polyethylene, although certain assumptions were necessary in estimating the material parameters.

For a better understanding of the above results, a more tractable problem was considered theoretcially: that of constant elongational flow with an imposed temperature change. An important result was that rapid cooling overpowers the effect of the viscoelastic response.

 
Degree
Master of Science
Major
Chemical Engineering
File(s)
Thumbnail Image
Name

Thesis76.M288.pdf

Size

4.18 MB

Format

Adobe PDF

Checksum (MD5)

4d6fcdfe6bca4a08186820fc3c0336a8


University Libraries

1015 Volunteer Boulevard
Knoxville, TN 37996
865-974-4351

Map & Directions
Donate to the Libraries
  • About
  • John C. Hodges Society
  • Speaking Volumes magazine
  • Outreach
  • Directory
  • Employment
  • Policies
  • Library Intranet
University of Tennessee power T logo

The University of Tennessee, Knoxville
Knoxville, Tennessee 37996
865-974-1000

Events
A-Z
Apply
Privacy
Map
Directory
Give to UT
Accessibility

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science