Design of a high speed inertial guidance system
The purpose of this work was to design and build an inertial guidance system using integrated circuits. The system consisted primarily of accelerometers, a gyroscope, an analog to digital converter, and a high speed programmable computer.
The accelerometers were first built using a mass supported between two springs and a wire wound potentiometer as the output. A second type of accelerometer was built using two strain gages mounted on a strip of metal. The output was formed in a Wheatstone bridge and integrated into velocity and distance by operational amplifiers.
The gyroscope was developed to maintain the orientation of the accelerometers in space. It consisted of a heavy disc that was supported by a cage with three degrees of freedom. A special motor and power supply were designed to spin the disc to a very high speed.
The analog to digital converter changed the voltage outputs from the accelerometers into usable numbers for the computer. The ramp voltage generator for the converter was first built using a digital to analog converter and a high speed transistor to form the ramp voltage. A second generator was built using a bootstrap integrator to achieve a more linear ramp.
The computer consisted of an arithmetic logic unit, a random access memory, a programmable sequencer, and a magnitude comparator. These units worked together to solve a set trajectory equations on a real time basis.
The results of this work proved the accelerometers to have a sensitivity of 0.002 g, high linearity, and good resistance to lateral accelerations. The gyroscope showed no observable precession when its cage was rotated around a single axis. The converter with the bootstrap integrator proved to be accurate to within 8 parts in 65,536. The computer successfully operated at a speed of 10 megahertz and had an accuracy of plus or minus one in the last digit.
Thesis76.D367.pdf
1.39 MB
Adobe PDF
fd18cee6d2b273490021f330d0afef9d