Sorptive pumping of gases by deep beds of sorbents
The pumping of gases by sorption in deep beds of sorbents has been investigated, and a mathematical model describing sorption rates (pumping speeds) for pure components has been developed assuming that the sorption rate is controlled by flow through the bed and diffusion into the sorbent particles. Computer codes for the mathematical model have been written. Results from these codes have been compared with experimental data for carbon dioxide sorption in deep beds with Linde molecular sieve type 5A. There is good agreement between the calculated and measured results but a small time delay must be added to the experimental data to bring the results into essentially exact agreement. The mathematical model contains simplifications which have been the most effective in the initial part of the pumping experiment where the rates are the highest. The principal cause for this small disagreement is believed to be failure of the model to account for diffusion resistance in the larger openings (macrostructure) of the sieve.
The computer codes prepared for the mathematical model can be used in bed design to calculate the sorption rates, pumpdown time, pressure gradients in the sorption bed, and the effects of different bed depths.
Thesis77b.T356.pdf
5.05 MB
Adobe PDF
1aa6181ed865240d8f8161854d502c45