A simplified approach for determining stresses on highway bridges
The purpose of this study is to develop a simplified method for determining the stress cycles in highway bridge girders due to present day traffic. The simplified method generated is applicable to general I-beam stringer deck bridge configurations.
Two interstate highway bridges located in Knoxville, Tennessee were instrumented, and stress data were collected with the use of a Raytheon 703 computer. The Raytheon computer, along with a magnetic tape unit, was housed in a mobile trailer. Stress data and truck traffic characteristics were obtained and compiled into stress and weight histograms respectively. The actual data were compared to the theoretical analysis, which was determined by the use of finite element methods and Monte Carlo Simulations. From the results of the comparison, a simplified method for determining stresses on the bridges was generated. This method was modified and may be used for more general bridge configurations.
The similarities in the results were found to be very favorable. Further research was suggested to find a method to distribute the stresses to each individual girder. Once the individual girder stresses are known, along with truck traffic characteristics, it becomes possible to approximately predict the fatigue life of the bridge.
Thesis76.B648.pdf
5.38 MB
Adobe PDF
70b69ea7f54b5abf6a9cead446f95f6b