On two-dimensional current and temperature distributions in a slag layer of a coal-fired MHD channel
A two-dimensional section of slag layer along a magnetohydrodynamic channel between plasma and channel wall consisting of a pair of electrode and insulator has been dealt with for evaluating temperature and current distributions. As the highly temperature-dependent electrical conductivity is taken into consideration, the current continuity and energy equations are a set of coupled, nonlinear Poisson's equations. Therefore, a closed mathematical solution is virtually impossible.
Analytic solutions based on conformal mapping and eigenfunction expansions have been surveyed for simplified cases. It does not mean an entire solution available. Hence, a finite-difference method is necessary for a solution.
Several numerical schemes are used to treat the problem. One successful scheme is devised with second order finite difference equations. Technique to solve a block-tridiagonal matrix equation is adapted for this coupled, nonlinear, elliptic-type problem to reduce computing time and storage in iterations.
The algorithm has been initially prepared for leakage current studies. The influences of geometric ratios, heat transfer rate, wall temperature, and terminal voltage or current and other variables which enter the physical problem through governing equations have been evaluated and discussed. Two-range exponential fitting of the electrical conductivity has been successful in the calculation, therefore, complex temperature-dependent properties can be handled.
When suitably assigned periodic boundary conditions are imposed, the scheme has been extended to calculate a total current distribution in the slag layer.
Both current and heat flux results have concentrations at edges of the electrode, however, due to the presence of the slag layer, the concentrations are much milder than those observed in channels of clean fuel.
Thesis77b.L58.pdf
5.92 MB
Adobe PDF
3aaefd7bde353389aaeb739ececa5e9b