A procedure for common cause failure analysis of complex systems
Common cause failure analysis, also called common mode failure analysis, is an integral part of a complete system reliability analysis. Although techniques for common cause failure analysis have been developed, the complexity of current nuclear power reactor safety systems has resulted in a tedious and often prohibitive analysis. The purpose of this research was to develop a procedure for common cause failure analysis that is applicable to problems beyond the scope of currently available methods.
A computer aided approach to common cause failure analysis developed at the Idaho National Engineering Laboratory is used as the basis of the new procedure. Fault tree analysis techniques provide the input to the computer aided analysis.
A primary problem of complex system analysis is the huge quantity of information that usually must be processed. The new procedure presented here is important because it transfers an unmanageable problem to a manageable one by attacking the problem on an incremental basis. The system fault tree is dissected, tiering the analysis to the subsystem level. Common cause failure information for the TOP event is then synthesized from the common cause failure analysis results of individual subsystems.
The Clinch River Breeder Reactor Plant (CRBRP) shutdown system is analyzed using the new procedure for possible common cause failures which might prevent shutdown of the reactor during reactivity transients. The results of the CRBRP shutdown system analysis indicate that the new procedure is a workable methodology for assessing potential common cause failures in highly complex systems.
Thesis77.W335.pdf
16.42 MB
Adobe PDF
debb4f9977ac9f1f5f420e3c43a09856