A study of the aerodynamic design of viscous nozzles used to accelerate large particles to high velocity
The problem considered is that of accelerating large, l0op particles to velocities on the order of 4,000 fps to produce a test environment that would be suitable for simultaneous ablation and erosion testing of entry vehicle nosetip materials. The basic approach to the problem is to use the slender channel approximation to reduce the governing equations for compressible subsonic and supersonic flow to a set of parabolic equations which are solved by the Patankar-Spaulding method. The Prandtl mixing length model is modified to account for the change in mixing length distribution that occurs when the boundary layers of the acceleration nozzle wall merge and the data of previous experiments are used to calibrate the program. The equations for the velocity and temperature history of a particle on the centerline of a particle acceleration nozzle are developed and solved using the Runge-Kutta algorithm. The calculated particle velocities are compared to data from previous experiments. The equations for the two-dimensional particle flows are developed and are solved using an iterative Euler method. The particle trajectories are shown to be very sensitive to the injection chamber design. Some performance benefits can be realized by optimizing the contour of the acceleration nozzle to produce the highest particle velocity at every station. The resulting contour produces higher particle velocities but has flow variable distributions that are very different from the more conventional conical nozzle. The analysis developed here is believed to be adequate for its intended purpose but improvements could be made in the area of particle diffusion modelling.
Thesis77b.K479.pdf
5.82 MB
Adobe PDF
944a0776306d6cd5fe5d55f9124a9848