Electrochemical studies of aluminum (III) in a fluoride melt and the triphenylmethyl cation in chloroaluminate melts
The electrochemistry of Al(III), in molten LiF-NaF-CaF2 (53-36-11 mole %), present as AlF3-6 was studied by cyclic voltammetry, chronopotentiometry, differential pulse polarography, and chronoamperometry in the temperature range from 625° to 1000°. The appearance of a well defined cyclic voltammogram for the reduction of Al(III) at a tungsten electrode, 200 mV anodic of the solvent reduction limit, establishes that Al(III) is reduced more easily than Na(I). The peak current is linearly dependent upon the Al(III) concentration. At temperatures below the melting point of aluminum, 660°, the concentration dependence of the peak potential and polarograms constructed from chronoamperograms indicate that Al(III) is reduced in a reversible three-electron process to form an insoluble deposit. Limited alloy formation between the tungsten electrode and the deposited aluminum is, however, indicated by cyclic voltammetry at 625°. No evidence is obtained for the existence of Al(I) or Al(II). Alloy formation between aluminum and tungsten becomes more important when aluminum is deposited above its melting point. Above 800° a polarographic log plot indicates that Al(III) is reduced in a reversible three-electron step to form aluminum that behaves as a soluble product. An iron impurity distorts cyclic voltammograms of Al(III) at tungsten. Added Al203 is reduced at the same potential as Al203 the presence of oxide, however, suppresses the oxidation of deposited aluminum. The reduction of Al(III) at several electrode materials is discussed in terms of apparent alloy formation.
Proton NMR, 13C NMR, and uv-visible spectroscopy have been used to establish that triphenylmethyl chloride, added to acidic chloroaluminate melts, quantitatively produces the triphenylmethyl cation. The electrochemistry of the triphenylmethyl cation was studied by cyclic voltammetry, normal pulse polarography and controlled-potential coulometry. The product of the two-electron reduction, the triphenylmethyl anion, a strong Lewis base, reacts reversibly with Al2Cl-7 to form an AlCl3 complex. This reversible following reaction is absent in basic melts, presumably due to the low concentration of Al2Cl-7. The pCl--dependent reduction mechanism was studied by cyclic voltammetry and normal pulse polarography.
Thesis77b.B685.pdf
7.25 MB
Adobe PDF
e9b1e3ea6b3193fe7ff7f3d7966280c7