Experimental studies and modeling of mechanical behavior for NicalonTM/SiC and NextelTM/BlackglasTM fiber fabric-reinforced ceramic-matrix composites
Fully understanding the mechanical behaviors of continuous fiber-reinforced ceramic composite (CFCC) material systems will provide guidelines for material selection, component designing, maintaining the safe service condition, and predicting the residual life. Since most of CFCCs were invented within the last decade, the database for their mechanical behaviors is still lacking. Many aspects are even left completely blank. The extensive application of CFCCs by industry is still hampered by insufficient understanding of the mechanical behavior and the lack of a well-developed and widely accepted design philosophy, in addition to the high production costs. There is an urgent need to understand the scientific principles controlling mechanical behaviors of woven fabric-reinforced CFCCs.
The current research is to systematically investigate and provide a fundamental and scientific understanding of factors controlling mechanical behaviors, including microstructures, fracture mechanisms, and load-bearing capabilities, for two commercially available 2-dimensional woven fiber fabric-reinforced CFCCs, namely, the plain-weave Nicalon fabric-reinforced SiC matrix composite and the crowfoot Nextel fabric-reinforced Blackglas composites, fabricated by ORNL and Northrop Grumman, respectively, which are under active consideration of designers for structural applications in fusion reactors and steam-turbine components.
In details, four aspects on mechanical behaviors of the two CFCCs were emphasized, namely, (i) microscopic correlation was established among microstructures, fiber/matrix interface damage, fiber strength degradation, and mechanisms of crack initiation and propagation, to characterize oxidation and porosity effects on flexural strengths of a Nicalon/SiC CFCC, (ii) analytical methods were formulated, and computer-aided models were developed to quantify lamina stacking sequence effects on elastic behaviors of a Nicalon/SiC CFCC, (iii) nondestructive evaluations by ultrasonics and x-ray computed tomography (X-ray CT) were conducted for a Nextel/Blackglas low-cost CFCC, and (iv) experiments were performed to investigate the fiber orientation effect on load-bearing capabilities, and damage mechanisms were also analyzed for a crowfoot Nextel/Blackglas lowcost CFCC.
Five first-time attempts were successfully implemented. First, a scanning electron microscopy (SEM) energy dispersive x-ray spectroscopy (EDXS) line-scan technique was employed to semi-quantitatively analyze the micro-chemical variation before and after oxidation of the Nicalon/C-SiC/SiC CFCC. Second, an analytical model was established to quantify the lamina stacking sequence effects on the elastic behaviors for the plain-weave Nicalon fiber fabric-reinforced SiC CFCC. Third, a SEM/EDXS elemental mapping method was employed to characterize the correlation between microstructures and micro-chemical elemental distributions for a Nextel 312/BN/Blackglas low-cost ceramic composite. Fourth, integration of ultrasonics and x-ray computed tomography was related for a crowfoot Nextel 312/BN/Blackglas low-cost ceramic composite. Fifth, the experiment was conducted on the effect of fiber orientation on the load-bearing g capabilities of the crowfoot Nextel 312/BN/Blackglas low-cost ceramic composite. Among them, the unique breakthrough is that a methodology and computer-aided modeling were provided that help to pave a way to optimize the design and process of CFCCs through an in-depth and systematic study of the laminate layup and lamina stacking sequence effects on elastic behaviors of CFCCs. Suggestions for future work are also included.
Thesis99b.Z36.pdf
19.35 MB
Adobe PDF
0e92e96a7c25c4f46bc5c7d00aa50477