Co-bioprecipitation of Uranium and selected heavy metals in sulfate containing solution
This study investigated several factors in the co-bioprecipitation of low concentration uranium and selected heavy metals in sulfate solution. The study also investigated the feasibility of the bio-metal removal process serving as a post-treatment method for the Department of Energy's process wastewater.
Desulfovibrio desulfuricans has the capability to biologically reduce soluble uranium (VI) to insoluble uranium (IV) and to concurrently precipitate toxic heavy metals with the produced sulfide. It was, therefore, chosen as the microorganism used in this study. Several selected factors that may affect this bio-metal removal process were examined in batch-scale experiments. These factors are: low initial concentration of uranium, sulfate concentration versus ionic strength, toxicity of heavy metals (zinc, nickel and copper), and chelating agents (citrate and EDTA). Synthetic wastewaters, which contained uranium, bicarbonate, lactate, sulfate, zinc, nickel, copper, citrate, and EDTA, were used for all experiments in the first phase of this study. Finally the more complex wastewater from the Y-12 Plant of the Department of Energy was evaluated for its biotreatability using this bio-metal removal process.
The experiments of the synthetic wastewater containing 4-6 mg/l of uranium demonstrated that uranium reduction by Desulfovibrio desulfuricans is possible at this low initial concentration. However, the uranium (VI) removal was found to be slower at this low initial concentration than that at the high initial concentration (100-200 mg/l). Under the experimental conditions, the uranium reduction is approximately a first order reaction with a reduction rate constant of 0.3113 hr-1.
As Sulfate concentration was gradually increased from 0 to 10,000 mg/l, the effectiveness of D. Desulfuricans for uranium removal was observed to decrease. This decrease could be caused by a combined effect of high ionic strength, electron acceptor competition, and electron donor limitation. Furthermore, in a low ionic strength condition (experiments A and C), the effect of sulfate concentration appears to be more important than that of ionic strength. In a high ionic strength condition (experiments A and B), the effect of ionic strength appears to be more important than that of sulfate concentration.
Zinc and nickel were removed by indirect enzymatic sulfide precipitation at almost 100% efficiency within one hour and four hours, respectively. Since the bioreactors achieved higher metal removal efficiency than that in the abiotic metal-sulfide precipitation reactors under the experimental conditions, the bio-metal removal process may indeed have advantages over abiotic treatment systems. Copper was found to inhibit the bioactivity of D. Desulfuricans at initial concentrations in excess of 1 mg/l.
Citrate and EDTA were chosen as reference ligands to evaluate the effect of ligands in a bicarbonate solution. Citrate was observed to partially affect uranium reduction and heavy metal removal. The metal-citrate stability constants were 108.99 and 106.76 for zinc and nickel respectively. These were smaller than the metal-bicarbonate stability constants of 1012.50 and 1012.60 for zinc and nickel respectively. EDTA on the other hand totally inhibited uranium reduction and heavy metal removal. The metal-EDTA stability constants for these complexes were 1016.9620.85 for zinc and nickel respectively, and were larger than those of the metal-bicarbonate complexes.
For the given Y-12 Plant wastewater, the results demonstrate that, with appropriate control of the investigated factors, the bio-metal removal process using D. desulfuricans is a potentially effective post-treatment method for the Y-12 Plant and similar industrial wastewaters.
Thesis96.C55.pdf
4.58 MB
Adobe PDF
79551f39d3537368712fdc5ff1d24d5b