Advanced diamond machining : modeling, simulation and control
The objective of this thesis was to model and to design a control for a large turning machine which utilizes a diamond tool bit. The emphasis of the thesis was on accurately modeling the dynamics of the system and to determine whether the machine, as it is described, can be controlled to produce the desired surface finish. The control design was performed using classical techniques, and simulated using state equations. The use of computer aided design tools, MATLAB and SIMNON, were used extensively to perform much of the analysis and simulation. Two simulations were be performed, one for the linear system and one including known disturbance sources as well as system nonlinearity. The results of the simulations will be used to illuminated the effectiveness and the weakness of the control structure. Suggestions were made as to parametric changes that may be implemented to produce the best possible surface finish with minimal control effort.
Thesis93.D253.pdf
2.07 MB
Adobe PDF
364606985ffd0d38373f998e27b342a1