The design and manufacture of a welded frame for the Superior Engineering Design Program's Robot
The design and manufacture of a low-cost industrial robot at the University of Tennessee's Mechanical and Aerospace Engineering Department is both a successful educational project as well as one suitable for actual industrial application. In its continuing development, the Superior Engineering Design Program (SEDP) Robot is fast approaching an industry application. The design and manufacture of a welded frame for the SEDP Robot is a significant one towards completing this development.
The manufacture of a welded frame required substantial manufacturing changes from the robot's original frame design. These changes included the design of several fixturing devices, the development of the welding process utilizing an Esab MAC 2000 Robotic Welder, and the development of the assembly process for the welded frames.
Because the SEDP Robot can be manufactured to a range of sizes, the welding fixture used to create the frames has to be expandable from two and one half feet square to four feet by six feet. The welding method selected is the MIG process, specifically, the Short Arc Metal Transfer Method.
Three frames were manufactured successfully utilizing the various fixtures and the robotic welder and assembled for this project. This thesis presents the project's requirements, final results, and the details of the design work and the manufacturing process optimization.
Thesis92.B2793.pdf
4.81 MB
Adobe PDF
4aa6b152b9b87875bb94080d1ce95723