Repository logo
Log In(current)
  1. Home
  2. Colleges & Schools
  3. Graduate School
  4. Masters Theses
  5. Low-volume production design and manufacture of a low-cost industrial robot
Details

Low-volume production design and manufacture of a low-cost industrial robot

Date Issued
May 1991
Author(s)
Kennedy, Michael E., 1963-
Advisor(s)
Clement C.Wilson
Additional Advisor(s)
Frank H. Speckhart
Osama Soliman
James A. Euler
Permanent URI
https://trace.tennessee.edu/handle/20.500.14382/59238
Abstract

Industrial use of robotic systems has been limited by the high cost, complexity, and difficult programming that is needed to use robotic systems effectively. Because of the high costs normally associated with a robot, many natural applications for robotic systems are not cost-effective in today's factory. If a low-cost robot was available, it could perform profitably many medium-accuracy tasks that are not now economically feasible.

University of Tennessee engineering students began work to develop a low-cost, medium-accuracy robot in 1986. Two mechanical engineering M.S. students designed and built a prototype robot, while an electrical engineering M.S. student developed a microprocessor-based robot control system. A new round of development activity commenced in 1989 after the prototype robot showed promise. The effort described in this document is part of a comprehensive effort within the University of Tennessee mechanical engineering department to design, build, and evaluate a complete industrial robotic system.

This thesis covers the author's work to improve the robot's mechanical design and to adapt it to low-volume production methods. The document describes the robot system's "theory of operation", important features and their considerations, and relevant design specifications. Assembly issues, system cost information, and recommendations for continued robot system improvement are also discussed.

 
Degree
Master of Science
Major
Mechanical Engineering
File(s)
Thumbnail Image
Name

Thesis91.K255.pdf

Size

24.33 MB

Format

Adobe PDF

Checksum (MD5)

80ff94e28448c0254a1c8f2e2af894cd

Thumbnail Image
Name

Thesis91.K255_Plates.zip

Size

53.39 MB

Format

Unknown

Checksum (MD5)

514100016f083be720e81a46512de4ab


University Libraries

1015 Volunteer Boulevard
Knoxville, TN 37996
865-974-4351

Map & Directions
Donate to the Libraries
  • About
  • John C. Hodges Society
  • Speaking Volumes magazine
  • Outreach
  • Directory
  • Employment
  • Policies
  • Library Intranet
University of Tennessee power T logo

The University of Tennessee, Knoxville
Knoxville, Tennessee 37996
865-974-1000

Events
A-Z
Apply
Privacy
Map
Directory
Give to UT
Accessibility

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science