Repository logo
Log In(current)
  1. Home
  2. Colleges & Schools
  3. Graduate School
  4. Masters Theses
  5. The polarization behavior of selected cathodic reactions used in corrosion testing of stainless steels and nickel base alloys
Details

The polarization behavior of selected cathodic reactions used in corrosion testing of stainless steels and nickel base alloys

Date Issued
December 1977
Author(s)
Huffstetler, Von Carlos, 1948-
Advisor(s)
E. E. Stansbury
Additional Advisor(s)
Edward S. Clark
Joseph J. P.
Permanent URI
https://trace.tennessee.edu/handle/20.500.14382/59169
Abstract

The purpose of this study was to examine the electrochemical nature of three different acid solutions and to evaluate factors affecting the shape of the polarization curves. Potentiodynamic polarization curves were obtained for 10% hydrochloric acid, 50% sulfuric acid-0.1 M ferric sulfate, and 10% chromic acid on a platinized platinum surface and on various nickel rich alloys. The polarization measurements were generally conducted at room temperature in hydrogen saturated solutions. However, several polarization curves were also measured in aerated solutions in order to determine the influence of oxygen on the electrochemical characteristics of each acid. Conclusions from this investigation are given below.

The equilibrium potentials on Pt in the hydrogen saturated solutions are 0.02 V vs. S.H.E. for HCl, 0.82 V for sulfuric acid-ferric sulfate, and 1.17 V for Cr03. acid.

In the case of each solution, iL,c is significantly larger than iL,a due to the greater concentration of reducible species present.

The oxidation of hydrogen in hydrogen saturated 10% HCl on Pt exhibits diffusion control with a constant limiting current density; however, at sufficiently positive potentials, a decreasing current density region exists that is independent of stirring.

In aerated 10% HCl solution on Pt, the oxygen electrode is complicated and is difficult to reproduce. Anodically, an oxide film is continuously forming on the metal surface which yields irreproducible results until the entire metal surface becomes covered with the oxide film. Cathodically, a stable intermediate of peroxide is formed whenever oxygen is reduced to water. Increasing peroxide concentrations cause decreasing rest potential values until an equilibrium level of peroxide is formed.

Anodic polarization of selected Ni-Cr-Mo alloys in hydrogen saturated 10% HCl revealed active-passive behavior for each alloy with Ecorr in each case close to the reversible hydrogen electrode. As the Cr content of an alloy was increased, a decrease of Epp occurred which tended to expand the passive region.

Although the actual Fe2+ activity was not known for the sulfuric acid-ferric sulfate solution, it was calculated to be five times smaller than the Fe3+ activity for Eo 0.82 V.

The reduction of ferric ions occurs at a limiting current density of iLc = 10-2 a/cm2, which is about a hundred times larger than the limiting current densities for either chromic acid or oxygen reduction. Thus, the nickel base alloys will tend to spontaneously passivate easiest in the sulfuric acid-ferric sulfate.

The 10% chromic acid solution is such a powerful oxidant at this concentration that the presence of oxygen has no effect on the polarization curves. However, the relatively low limiting current density of iL,c 3 x 10-5 a/cm2 will not spontaneously passivate the nickel base alloy unless the icrit for the alloy is less than iL,c

 
Degree
Master of Science
Major
Chemical Engineering
File(s)
Thumbnail Image
Name

Thesis77.H842.pdf

Size

3.99 MB

Format

Adobe PDF

Checksum (MD5)

4a109c5214859b48edbef0c6196e0940


University Libraries

1015 Volunteer Boulevard
Knoxville, TN 37996
865-974-4351

Map & Directions
Donate to the Libraries
  • About
  • John C. Hodges Society
  • Speaking Volumes magazine
  • Outreach
  • Directory
  • Employment
  • Policies
  • Library Intranet
University of Tennessee power T logo

The University of Tennessee, Knoxville
Knoxville, Tennessee 37996
865-974-1000

Events
A-Z
Apply
Privacy
Map
Directory
Give to UT
Accessibility

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science