Synthesis, characterization and morphological studies of poly(m-phenylene isophthalamide) its block copolymers and some mixtures
The morphological interest in the BAB type triblock copolymers, in which A is poly(m-phenylene isophthalamide) and B is poly(ethylene oxide), was the major motivation for carrying out this research. In the present work, poly(m-phenylene isophthalamide) homopolymers and their various block copolymers were synthesized. The syntheses were followed by characterization and morphological studies. In addition, the morphological studies were also extended to include poly(ethylene oxide)-4000, isophthalic acid, mixtures of poly(ethylene oxide)-4000 with poly(mphenylene isophthalamide) and mixtures of isophthalic acid with the BAB and ABA block copolymers.
The syntheses of poly(m-phenylene isophthalamide) homopolymers and their block copolymers employed the low temperature solution polymerization method developed by Kwolek and co-workers. Characterization was done by Dilute Solution Viscometry, Infrared Spectroscopy, Differential Scanning Calorimetry, X-ray Diffraction and Light Scattering. Morphological studies were mainly conducted on solution cast films by using a LEITZ polarizing optical microscope.
Results from the present work showed no spherulitic crystallization in the solution cast films of poly(m-phenylene isophthalamide) and its block copolymers. On the other hand, the mixtures of poly(m-phenylene isophthalamide) with poly(ethylene oxide)-4000 and the mixtures of isophthalic acid with block copolymers showed well-developed Maltese cross patterns. These observations were compared with those reported by Bernauer and Keith and Padden. Detailed comparison and discussion are presented in Chapter VI.
Several factors which influence the film morphology are revealed in this research. These include: (1) the chemical nature of the material, (2) the composition of the solution, (3) the thermal history of film preparation, (4) the thickness of the film, (5) the presence of LiCl in the casting solution, and (6) the presence of a more viscous high molecular weight polymer.
Thesis77.H675.pdf
10.65 MB
Adobe PDF
ce41ac6095805914b03d9823c34f429b