Repository logo
Log In(current)
  1. Home
  2. Colleges & Schools
  3. Graduate School
  4. Masters Theses
  5. Interfacial Disulfide Chemistry and Plasma Surface Activation for Fatigue Healing in Carbon Fiber / UHMWPE Composites
Details

Interfacial Disulfide Chemistry and Plasma Surface Activation for Fatigue Healing in Carbon Fiber / UHMWPE Composites

Date Issued
May 1, 2026
Author(s)
McCullar, Chase
The University of Tennessee
Advisor(s)
Uday Vaidya
Additional Advisor(s)
Krishnan Veluswamy
Umesh Marathe
Permanent URI
https://trace.tennessee.edu/handle/20.500.14382/57785
Abstract
Fiber-reinforced polymer laminates are widely used in aerospace, defense, and transportation industries for their high specific strength and stiffness. However, their stacked-ply construction produces resin-rich interlaminar regions that are inherently prone to delamination, regardless of whether the plies are nonwoven mats, unidirectional tapes, or woven fabrics. The main damage mode for these laminates is fatigue-driven delamination growth. Under cyclic loading, sub-critical delamination can propagate at energy release rates far below the static fracture toughness. These flaws accumulate with each cycle until catastrophic failure. Traditional repair methods address the symptoms of delamination rather than restoring the original interface. Self-healing composites have emerged to address this. However, these systems are either single-use, complex to manufacture, or rely on physical chain entanglement. Most of the published vitrimer composite systems distributes dynamic chemistry throughout the entire matrix rather than localizing it in the delamination prone interply region. This work develops an interply healing composite in which 4-aminophenyl disulfide (4-APD) is applied as a standalone compound at the ply interfaces of a nonwoven carbon fiber/ultra-high molecular weight polyethylene (CF/UHMWPE) composite. Atmospheric plasma surface treatment is used to generate the polar functional groups required to anchor the 4-APD at those interfaces. Four variants were fabricated and tested: an untreated control (CN), plasma only (CP), 4-APD only (CD), and the combined variant (CPD). Each was characterized by Fourier Transform Infrared (FTIR) spectroscopy, water contact angle, three-point bend fatigue, X-ray computed tomography, three-point bend fatigue testing, and dynamic mechanical analysis. After 30 minutes of fatigue and a healing cycle, CPD achieved a full-curve fatigue healing efficiency of 94.7%, exceeding all other variants with highly reproducible recovery across specimens. X-ray CT was used to compute void content. CPD returned to within 3.2% of its original void content, while CN remained 18.8% above baseline. CN also exhibited the largest fatigue variance and had visible deformation post-heal. These results establish interfacial anchoring of dynamic covalent chemistry as a viable alternative to bulk vitrimer matrices for fatigue-healable thermoplastic composites.
Subjects

Engineering, Material...

Chemistry, General

Plasma

Composites

Vitrimers

Non woven

Carbon fiber

Ultra-high-molecular-...

Degree
Master of Science
Major
Mechanical Engineering
File(s)
Thumbnail Image
Name

MCCULLAR-PRIMARY-2026.pdf

Size

2.24 MB

Format

Adobe PDF

Checksum (MD5)

de67c0c1b915916ade3f92a82b3e83ce


University Libraries

1015 Volunteer Boulevard
Knoxville, TN 37996
865-974-4351

Map & Directions
Donate to the Libraries
  • About
  • John C. Hodges Society
  • Speaking Volumes magazine
  • Outreach
  • Directory
  • Employment
  • Policies
  • Library Intranet
University of Tennessee power T logo

The University of Tennessee, Knoxville
Knoxville, Tennessee 37996
865-974-1000

Events
A-Z
Apply
Privacy
Map
Directory
Give to UT
Accessibility

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science