Experimental and Computational Studies on the Impact of the Isotope Effect in the Tokamak Divertor and Pedestal
Date Issued
May 2026
Author(s)
Mattes, Ray Swan
The University of Tennessee
Advisor(s)
Livia Casali
Additional Advisor(s)
David Donovan
Phil Synder
Ivan Maldonado
Abstract
As fusion devices transition towards feasible fusion power plant (FPP) designs, standard operation will shift to include deuterium-tritium (DT) fuel mixtures, as opposed to the deuterium (D) plasmas that are used in most literature. The increase in the average mass of the fuel results in what are referred to as “isotope effects”. Investigating the role played by the isotope mass is a key challenge. Due to restrictions on T usage, hydrogen (H) plasmas are most often utilized to study isotope effects. This thesis focuses on the boundary plasma, including the divertor and pedestal regions. Here the isotope effects are strong and highly coupled, potentially impacting FPP operation. Presented here are the first integrated divertor and pedestal studies of the isotope effect, combining experiments at DIII-D in H and D with interpretation using the SOLPS-ITER code. It is found that higher mass leads to reductions in particle and power fluxes to the divertor target prior to detachment, with particle fluxes decreasing by a factor of 2x–4x from H to D. The effects on the pedestal structure appear mostly due to fueling differences. Detachment occurs at a ~15% higher upstream electron density in H. SOLPS-ITER modeling, constrained by the experiments, indicates that carbon sputtering is likely the dominant cause, while neutral mean free path (MFP) changes are not a primary driver. Modeling with pure plasmas using all three hydrogen isotopes shows that isotope effects in the SOL arise from the momentum balance due to fluid inertia, reducing convective transport as mass is increased. From H to T, the particle flux is reduced by a factor of 2 and the heat flux by up to 20%. Detachment access is unaffected without impurities. Scanning injected power reveals that heavier isotopes exhibit reduced capacity to sustain a recycling-driven ionization front. When including tungsten walls the flux dependence on the isotope remains central but is modified by higher divertor energy recycling. Collectively, this work provides the first assessment of the isotope effect across the boundary plasma, offering predictions for how DT fuel will impact divertor performance, SOL transport, and pedestal fueling in FPPs.
Degree
Doctor of Philosophy
Major
Nuclear Engineering
File(s)![Thumbnail Image]()
Name
MATTES-PRIMARY-2026.pdf
Size
5.95 MB
Format
Adobe PDF
Checksum (MD5)
1078c0b8edc060b507b3f855301962a0