A Foundation for Redefining the Failure Criterion for Tristructural Isotropic Particle Fuel based on the Mechanical Impact of Fission Product Chemical Attack on Silicon Carbide
Date Issued
May 2026
Author(s)
Bertrand, Bailey Thomas
The University of Tennessee
Advisor(s)
Brian D. Wirth
Additional Advisor(s)
Nicholas R. Brown
Wen Jiang
Lawerence H. Heilbronn
Abstract
This dissertation describes an investigation into the mechanical effects of palladium (Pd) chemical attack on silicon carbide (SiC) in tristructural isotropic (TRISO) fuel. The analysis is carried out in the BISON finite element fuel performance code developed and maintained by Idaho National Laboratory. Pd chemical attack is often observed during TRISO fueled in-situ experiments and is associated with the failure sites in the SiC layer. Present day Pd failure models for TRISO particle fuel, particularly in BISON, are too extreme and fail to capture many aspects about the phenomenon. Through the use of BISON, Pd chemical attack is emulated via material block implantation into TRISO mesh geometries in 1D, 2D, and 3D. Uniform SiC thinning of Pd chemical attack is investigated in 1D and 2D. The CUBIT Geometry and Mesh Generation Toolkit is used to investigate localized Pd chemical attack in 2D and 3D. The reactor conditions selected for fuel performance model input are derived from advanced reactor concepts. One steady state condition and four transient scenarios are utilized in this work. Calculations of failure probability for SiC layer is computed through the stress state of the system via Weibull Statistics. Standard failure probabilities of TRISO particle fuel are on order of 10^(-5). Uniform SiC thinning saw increases of this failure probability to 10^(-3). Localized Pd chemical attack, depending on the geometry of the implanted inclusion, also resulted in failure probabilities on order of 10^(-3). These failure probabilities are substantially lower than existing BISON model predictions, however, key material models for the phase of Pd are lacking in the literature. This work aims to provide a basis for redefining the Pd chemical attack failure criterion of TRISO particle fuel through mechanical analysis between the SiC and implanted Pd across advanced reactor steady state and transient conditions.
Degree
Doctor of Philosophy
Major
Nuclear Engineering
Embargo Date
May 1, 2029