Mitigating Interfacial Degradation and Shorting in Lithium Metal Solid-State Batteries
Date Issued
May 2026
Author(s)
Haq, Shomaz Ul
The University of Tennessee
Advisor(s)
Andrew S. Westover
Additional Advisor(s)
Yanfei Gao
Robert L. Sacci
Sudarsanam Suresh Babu
Abstract
Electrification of transportation and portable technologies is increasing demand for batteries that provide higher energy density, improved safety, and long operational lifetimes. Conventional liquid-electrolyte lithium-ion batteries have enabled widespread adoption of these technologies but face limitations in energy density and safety. Solid-state batteries (SSBs), which pair a lithium (Li) metal anode with a solid electrolyte, are promising next-generation batteries capable of increasing energy density while improving thermal and electrochemical stability. These advantages are particularly relevant for applications such as electric vehicles, portable electronics, drones, and aerospace systems. This dissertation examines three barriers limiting practical Li metal SSBs: (i) high interfacial resistance caused by poor physical contact at the Li metal anode - solid electrolyte interface and the lack of standardized cell assembly and testing protocols, (ii) void formation during Li stripping that causes contact loss and current constriction during subsequent Li plating, promoting Li dendrite nucleation, and (iii) Li penetration and dendrite formation within solid electrolytes leading to short circuiting and cell failure. To address these challenges, the dissertation presents three sequential studies. First, Li|LLZTO cells are benchmarked by evaluating Li deposition methods, solid electrolyte surface treatments, environmental control during cell assembly, and electrochemical testing protocols. Melt deposition of Li combined with controlled polishing and annealing of LLZTO reduces interfacial resistance while revealing void formation during Li stripping as a dominant degradation mechanism. Building on these insights, a second study investigates lithium-silver (Li-Ag) alloy anodes to mitigate void formation. Enhanced Li diffusivity within Li-Ag alloys promotes uniform Li transport during stripping, reducing void nucleation and improving interfacial stability. Finally, a third study explores borosilicate bulk ionic glass (BIG) solid electrolytes fabricated by rapid splat quenching. These amorphous electrolytes leverage geometric frustration and entropy stabilization to produce disordered structures with sufficient ionic transport and mechanical compliance, improving resistance to Li penetration and dendrite propagation. BIG electrolytes also demonstrate scalable melt processing and have generated commercialization interest, including intellectual property. Overall, this work advances understanding of chemo-mechanical failure in Li metal SSBs and identifies materials and interface engineering strategies that may improve the reliability of next-generation SSBs.
Degree
Doctor of Philosophy
Major
Energy Science and Engineering
Embargo Date
May 1, 2027