MICROSTRUCTURE, MECHANICAL PROPERTIES, AND ION IRRADIATION OF NI-BASED ALLOYS FOR MOLTEN FLUORIDE SALT APPLICATIONS
Date Issued
May 2026
Author(s)
Thier, Ryan Charles
The University of Tennessee
Advisor(s)
Steven J. Zinkle
Additional Advisor(s)
Eric Lass
Erik Herbert
Stephen Taller
Jay Tiley
Abstract
Nickel-base alloys constitute a promising class of structural materials for high temperature applications, including for fluoride-salt-cooled nuclear energy systems such as molten salt reactors (MSRs) and fluoride-salt-cooled high temperature reactors (FHRs). These energy systems’ upper-operating temperature is limited by available structural materials options. Legacy alloys such as Hastelloy® [registered trademark] N are limited in their high temperature creep strength and demonstrated issues with radiation resistance during previous experiments. A materials gap exists for nickel-base alloys with improved corrosion resistance and adequate radiation resistance. In this work, the microstructure, mechanical properties, and radiation resistance of a class of nickel-base alloys are investigated. Heats of novel nickel-base alloys were fabricated in sizes of 50 lb. and 300 lb. Microstructural characterization and mechanical testing were performed on specimens fabricated from the heats, showing variable success in scaling alloys to larger heat size while preserving high temperature mechanical performance depending on the strengthening mechanisms used. Nickel ion irradiations of the alloys were performed, with single ion irradiations at 600 and 750° [degrees] C, as well as dual-ion irradiations with the addition of helium at 600° [degrees] C. Irradiated specimens were characterized with nanoindentation hardness and scanning transmission electron microscopy. Both carbide-strengthened and gamma-prime strengthened alloys demonstrated significantly improved high temperature mechanical performance over legacy alloys, with some reduction in tensile strength and creep life for the carbide-forming alloy. Ion irradiations revealed good stability of γ’ [gamma – prime] precipitates up to 30 displacements per atom (DPA) and overall low swelling and low hardening for the novel alloys, indicating good radiation resistance. Nanoindentation testing using a constant modulus assumption is shown to be an effective means of conducting instrumented indentation testing on ion-irradiated materials. Overall, on the basis of mechanical property performance and radiation stability, the novel alloys show significant potential for use in MSR and FHR applications, warranting further development and testing.
Degree
Doctor of Philosophy
Major
Nuclear Engineering
Embargo Date
May 1, 2027