Comprehensive Analysis of W Erosion and C deposition during and between ELMS in the DIII-D MRC and SAS-VW-VW Configurations
Date Issued
May 2026
Author(s)
Cacheris, Alec
University of Tennessee at Knoxville
Advisor(s)
David C. Donovan
Additional Advisor(s)
Tyler Abrams
Maik Lang
Stuart Loch
Jun Ren
Abstract
To bring tokamak fusion reactors to the power grid for Carbon (C)-free reliable energy, the survival of plasma facing components (PFCs) must be ensured. Many current and future tokamak fusion reactor designs operate in high confinement mode (H-mode), which are typically accompanied by edge localized modes (ELMs) plasma instabilities. ELMs release large particle and heat fluxes from the edge of the confined plasma to the divertor, causing melting, erosion, and other damage mechanisms. Tungsten (W) is the leading candidate for the divertor material in tokamak fusion reactor research, primarily due to its high melting temperature. The prediction of W divertor erosion in a tokamak fusion reactor environment is compromised by both the unpredictable nature of ELMs and the presence of impurities. While ELM physics are not the primary focus of this work, W divertor erosion during ELMs (intra-ELM) and between ELMs (inter-ELM) is studied and compared between computationally predicted and spectroscopically measured results. Impurities, such as carbon (C) or boron (B), can deposit on or implant in the W divertor surface. Effectively, these impurities both erode the W divertor surface and shield it from bombarding ions. The main objective of this thesis is to investigate how the interaction between C and W in a mixed-material environment affects W erosion.
Disciplines
Degree
Doctor of Philosophy
Major
Nuclear Engineering
File(s)![Thumbnail Image]()
Name
CacherisDiss_2026.pdf
Size
5.18 MB
Format
Adobe PDF
Checksum (MD5)
155d22efdc4385aa3bb1e41f6792d914